Palms Off Gaming Mint Fit PSA Slab Sleeves — Regular
A$7.95 — In stock
PSA cases scratch in ordinary ways: dragged across a desk, packed against other slabs in a box, handled at a card show. These Mint Fit sleeves give the case a fitted outer layer so the acrylic stays clear. Each pack holds 100 sleeves in 50 micron polypropylene, cut at 86 × 137 mm with a resealable lip, which is a close fit over a standard PSA slab rather than a loose bag.
Why collectors pick this one
- 100 sleeves per pack
- 50 micron polypropylene, acid free and PVC free
- 86 × 137 mm body with a tapered resealable lip
- Fits standard PSA slabs (about 80 × 135 × 6 mm)
- High clarity so the label and grade read through the sleeve
Choosing the right one
Match the sleeve to the thing you are protecting, not to the card. PSA and BGS slab sleeves come in regular and extra thick; mag lock sleeves are split by the case's point range; top loader and booster pack sleeves match those holders. The inner sleeves are the exception — those go directly on the card, in standard or Japanese mini size, top-loading or side-loading.
About the Mint Fit PSA Slab Sleeves — Regular
A standard PSA case measures roughly 80 × 135 mm and about 6 mm deep. The sleeve body is 86 × 137 mm, so there is enough allowance for the slab's depth to slide in without force, but not so much that the case rattles around inside. The tapered resealable lip folds over the top and holds the sleeve shut, and it opens again without tearing, which matters if you pull slabs out to photograph or show them.
The film is polypropylene at 50 micron, acid free and without PVC, so it is suitable for slabs that sit in storage for years. High clarity is the point of a slab sleeve: the label, grade and card need to read straight through it, both in person and in a listing photo. The sleeve also takes the light scuffs that would otherwise land on the case itself.
Choose the Regular version for everyday PSA slabs going into a box, a slab case or the post. If you would rather have a heavier film for slabs that are handled or shipped often, look at the Extra Thick version of the same sleeve. For Beckett cases, use the BGS sleeve instead, because BGS slabs are a different shape to PSA.
Specifications
- Brand
- Palms Off Gaming
- Type
- Graded Card Protectors
- SKU
- MF-PSA-REG
- Pack size
- 100 sleeves
- Material
- Polypropylene, 50 micron
- Sleeve size
- 86 × 137 mm plus resealable lip
- Fits
- Standard PSA graded slabs (approx. 80 × 135 × 6 mm)
- Closure
- Tapered resealable lip
- Archival
- Acid free, PVC free
Common questions
What is the difference between regular and extra thick?
Extra thick sleeves fit the deeper slabs — thicker cards produce a thicker case. If a regular sleeve will not go on without force, the slab needs the extra thick version.
What is a side-loading inner sleeve for?
The opening is on the side rather than the top. Combined with a top-loading outer sleeve, the two openings sit at right angles, which seals the card completely when double-sleeved.
Do slab sleeves affect resale?
They help. A slab with clean, unscuffed acrylic presents better and photographs better — the sleeve takes the handling marks that would otherwise land on the case.